Pickup/Feeding System; Orienting The Deck/Cassette Pickup Roller - Canon ImageRunner 600 Service Manual

CHAPTER 13 TROUBLESHOOTING
D.

Pickup/Feeding System

1

Orienting the Deck/Cassette Pickup Roller

Mount the deck/cassette pickup roller by reversing the steps used to remove it with the follow-
ing in mind:
• The front and rear pickup rollers are not interchangeable.
• The front pickup roller is identified by its gold collar. When mounting the pickup roller [1] to
the pickup assembly, be sure that the round marking [2] and the round marking [3] on the collar
(gold) are toward the copier's front.
• The rear pickup roller is identified by its silver collar. When mounting the rear pickup roller [4]
to the pickup assembly, be sure that the round marking [5] on the side of the roller is toward the
copier's front while the round marking [6] on the collar (silver) is toward the copier's rear.
13-18
COPYRIGHT © 1999 CANON INC.
Direction
of rotation
Collar (gold)
[1]
Figure 13-D201a
Direction
of rotation
[5]
Collar (silver)
[4]
Figure 13-D201b
[2]
[3]
(front of the copier)
[6]
(rear of the copier)
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.