Canon ImageRunner 600 Service Manual page 439

2. Removing the Manual Feed Tray
Switch Assembly
1) Remove the inside right cover.
2) Remove the two screws [1], and discon-
nect the two connectors [2]; then, detach
the pre-transfer charging assembly [3].
3) Disconnect the three connectors [4], and
remove the screw [5]; then, detach the po-
tential sensor PCB [6].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
Figure 9-E703
[4]
[4]
Figure 9-E704
[2]
[3]
[6]
[5]
9-63