Canon ImageRunner 600 Service Manual page 537

Hide thumbs Also See for ImageRunner 600:

Table of Contents

3) Turn on the copier's main switch, and

check to make sure that LED2 of the con-

troller flashes.

Make a copy, and check to make sure that

LED3 flashes during copying operation.

4) If the Communications Board-A1 or the

Interface Board-B1 is to be connected (re-

quiring the Power Supply-A1), go to 5).

Turn on the copier's main switch, and

check to make sure that LED1 of the con-

troller turns on and LED2 turns off.

Make a copy, and check to make sure that

LED3 flashes during copying operation.

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

CHAPTER 11 INSTALLATION

Figure 11-C603

Figure 11-C604

Chapters

Table of Contents