12. Mounting The Manual Feed Roller - Canon ImageRunner 600 Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM

12. Mounting the Manual Feed Roller

1) Set the manual feed roller assembly to the
copier.
2) Mount the rear fixing plate 2 and the rear
fixing plate 1 in the order indicated; then,
secure them in place with the mounting
screw [3].
Caution:
When mounting the manual feed roller,
hook the two claws of the rear fixing
plate 2 on the three holes in the rear side
plate; then, mount the rear fixing plate 1
to secure.
3) Secure the front fixing plate [4] with two
screws [5].
7-54
COPYRIGHT © 1999 CANON INC.
Figure 7-A826
[4]
[5]
Figure 7-A827
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Rear fixing plate 2