Removing The Control Panel; Controller (Cpu) Pcb And The Control Panel Inverter Pcb - Canon ImageRunner 600 Service Manual

6) Remove the four screws [8] from the front
cover side, and disconnect the three cables
[9]; then, free the cable [10] from the
cable clamp, and detach the control panel
[11].
2.

Removing the Control Panel

Controller (CPU) PCB and the
Control Panel Inverter PCB
1) Remove the four mounting screws [1],
and disconnect the eight connectors [2];
then, detach the control panel controller
(CPU) PCB [3].
COPYRIGHT © 2000 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANONimageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[9]
[11]
[8]
[10]
Figure 9-B704
[1] [3]
[2]
Figure 9-B705
[8]
[9]
[2] [1]
[1]
9-31