Changing The Size Of The Front Deck (Right And Left) - Canon ImageRunner 600 Service Manual

CHAPTER 11 INSTALLATION
J.

Changing the Size of the Front Deck (right and left)

No.
1 Press the releasing button, and slide out
the deck.
2 Remove the screw from the rear guide
plate, and fix the guide plate in position to
suit the new size.
3 Remove the screw (one each) from the
left and right guide plates. Then, fix the
guide plates in position to suit the new
size.
4 Put paper in the deck.
5 Attach the new size sticker to the paper
size plate of the deck.
6 Slide the deck into copier.
7 Start service mode, and register the new
paper size.
11-20
COPYRIGHT © 1999 CANON INC.
Work Remarks
Screw
Guide plates
Screws
For deck (R): COPIER>OPTION>CST>
P-SZ-C1
For deck (L): COPIER>OPTION>CST>
P-SZ-C2
A4: 6, B5: 15, LTR: 18
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Guide plate