C.
Deck Paper Detection
1.
Detecting the Presence/Absence of Paper
The presence/absence of paper inside the deck is detected by the deck paper absent sensor
(PS102). When the deck runs out of paper and, as a result, the paper detecting lever of the pickup
roller assembly leaves the deck paper absent sensor, the copier's control panel will indicate the
absence of paper.
2.
Switching the Deck Paper Size
To change the deck paper size, move the guide plate inside the deck at time of installation or in
response to the user's request, and enter the new paper size in service mode (OPTION>ACC>DK-
P).
COPYRIGHT © 1999 CANON INC.
Paper detecting lever
Figure 10-105a Paper Present
Paper detecting lever
Figure 10-105b Paper Absent
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
Deck paper absent sensor
Copy paper
Lifter
Deck paper absent sensor
Lifter
10-7