Removing The Inverter Cooling; Fan - Canon ImageRunner 600 Service Manual

4) Disconnect the connector [4], and remove
the three screws [5]; then, detach the drum

fan [6].

Caution:
When mounting the drum fan, be sure
that the direction of air current matches
the marking indicated on the fan.
9.

Removing the Inverter Cooling

Fan
1) Remove the rear cover.
2) Remove the two screws [1], and slide out
the inverter fan [2].
Caution:
When mounting the inverter cooling fan,
be sure that the direction of air current
matches the marking indicated on the
fan.
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
[5]
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[4] [6]
Figure 9-C716
[1] [2] [1]
Figure 9-C717
[5]
9-41