Relay Pcb; Mfc Pcb - Canon ImageRunner 600 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
J.

Relay PCB

1) Remove the lower left cover.
2) Disconnect the connector from the relay
PCB, and remove the PCB spacer to de-
tach the relay PCB [1].
K.

MFC PCB

1) Remove the rear cover.
2) Remove the system box.
3) Remove the 16 screws [1], and detach the
system cover 1 [2].
9-68
COPYRIGHT © 1999 CANON INC.
Figure 9-J701
[1]
[1]
[1]
Figure 9-K701
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
[1]
[1]
[1]
[2]
[1]