Removing The Sub Thermistor - Canon ImageRunner 600 Service Manual

CHAPTER 8 FIXING SYSTEM
5) Remove the two thermistor retaining
springs [4], and remove the main ther-
mistor [5].
5.

Removing the Sub Thermistor

1) Slide the fixing assembly out of the
copier.
2) Remove the fixing cleaning belt and the
oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1], and remove
the screw [2]; then, remove the sub ther-
mistor assembly [3].
5) Remove the screw [4], and remove the sub
thermistor [5].
8-36
COPYRIGHT © 1999 CANON INC.
[4] [5]
Figure 8-C510
[1]
Figure 8-C511
Figure 8-C512
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[4]
[2]
[3]
[4] [5]