After Replacing The Ccd Unit - Canon ImageRunner 600 Service Manual

5) Remove the three fixing screws [5], and
disconnect the connector [6]; then, detach
the flat cable [7] from the CCD PCB, and
detach the CCD unit [8].
2.

After Replacing the CCD Unit

1) Execute
COPIER>FUNCTION>CCD>CCD-ADJ
in service mode.
2) When all items under
COPIER>ADJUST>CCD and data under
COPIER>ADJUST>LAMP>L-DATA
have been updated, record the results on
the service label.
COPYRIGHT © 1999 CANON INC.
CHAPTER 4 IMAGE PROCESSING SYSTEM
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[5]
[8]
[6]
Figure 4-A403
[7]
Figure 4-A404
[5]
[5]
4-23