Orientation Of The Deck Pickup/Feeding Roller; Removing The Deck Separation Roller - Canon ImageRunner 600 Service Manual

5. Orientation of the Deck Pickup/
Feeding Roller
When mounting the deck pickup/feeding
roller [1], be sure that the belt pulley [2] is to-
ward the front.
When mounting the pickup/feeding roller
rubber piece to the pickup/feeding roller shaft,
be sure that the marking [3] is toward the rear.
6. Removing the Deck Separation
Roller
1) Detach the deck from the copier, and re-
move the two screws [1]; then, detach the
separation roller support plate [2].
2) Remove the joint, and detach the deck
separation roller [3].
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
[3]
[2]
[1]
Figure 10-D306
[1]
[2]
Figure 10-D307a
[3]
Figure 10-D307b
(front)
10-41