Canon ImageRunner 600 Service Manual page 434

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
7) Remove the waste toner case, remove the
five screws [6], and disconnect the four
connectors [7]; then, remove the waste
toner case mount [8].
8) Remove the E-ring [10] from the tip of the
waste toner pipe [9]; slide up the bushing
[11], and remove the two screws [12];
then, remove the waste toner pipe [9].
9-58
COPYRIGHT © 1999 CANON INC.
[6] [7] [8]
[6]
Figure 9-D714
[9]
Figure 9-D715
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[6]
[7] [7]
[10]
[11]
[12]