Removing The Feeding Roller 2; Assembly; Removing The Separation Roller - Canon ImageRunner 600 Service Manual

6. Removing the Feeding Roller
1) Remove the pickup assembly from the
copier.
2) Remove the screw [2], and detach the
feeding roller cover [1].
3) Remove the stop ring [3] form the front of
the fixing roller.
4) Remove the stop ring [4] and the pickup
roller [5] at the font; then, detach the feed-
ing roller [7] together with the timing belt
[6].
7. Orientation of the Feeding Roller
of the Deck/Cassette Pickup

Assembly

When mounting the feeding roller assem-
bly [1] to the deck/cassette pickup assembly,
be sure that the belt pulley [2] is toward the
copier's front.
When mounting the feeding roller [3] to
the feeding roller shaft [4], be sure that the
round marking [5] is toward the copier's front.
8.

Removing the Separation Roller

1) Remove the two mounting screws [1], and
remove the feeding guide plate [2]; then,
detach the open/close guide [3].
(Skip this step for the pickup assembly of
the front deck left.)
COPYRIGHT © 2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[1] [2] [4] [5] [3]
Figure 7-B808
[3]
[4]
[2]
[1]
Figure 7-B809
[2]
[1]
Figure 7-B810
[7] [6]
[5]
(front of the copier)
[3]
[1]
7-59