5
Orienting the Manual Feed Pickup Roller
When routing the feeding roller assembly [1] to the manual feed tray pickup assembly, be sure
that the belt pulley [2] is toward the copier's front. When mounting the feeding roller [3] to the
feeding roll shaft [4], be sure that the round marking [5] is toward the copier's front.
6
Orienting the Side Paper Deck Feeding Roller
When mounting the feeding roller [1] to the side paper deck pickup assembly, be sure that the
belt pulley [2] is toward the copier's front. When mounting the feeding roller [3] to the feeding roler
shaft [4], be sure that the round marking [5] is toward the copier's rear.
COPYRIGHT © 1999 CANON INC.
[5]
[3]
[4]
[2]
[1]
Figure 13-D205
[5]
[3]
[4]
[2] [1]
Figure 13-D206
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
(front of the copier)
(front)
13-21