Adjusting The Pressure Of The Separation Roller; Roller - Canon ImageRunner 600 Service Manual

9. Adjusting the Pressure of the
Separation Roller
If double feeding or pickup failure occurs,
adjust the position of the pressure spring used
for the separation roller.
• If double feeding occurs, move the spring in
the direction of B.
• If pickup failure occurs, move the spring in
the direction of A.
10. Orientation of the Separation

Roller

Keep the following in mind when replac-
ing the separation roller.
Caution:
If mounted in the wrong orientation, in-
terference with the clamp washer can
lead to faults. Take care.
COPYRIGHT © 1999 CANON INC.
Wider groove
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
A
B
Figure 7-B814
(front of the copier)
Figure 7-B815
Narrower groove
(rear of the copier)
7-61