10. Removing The Pre-Transfer; Charging Assembly Fan - Canon ImageRunner 600 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
3) Disconnect the connector [3], and detach
the inverter cooling fan [2].

10. Removing the Pre-Transfer

Charging Assembly Fan

1) Open the front door.
2) Remove the inside cover (process unit).
3) Remove the two screws [1], and discon-
nect the two connectors [2]; then, detach
the fan motor [3].
9-42
COPYRIGHT © 2000 CANON INC.
[3]
Figure 9-C718
[1]
Figure 9-C719
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[2]
[2]
[3]