Table of Contents
Advertisement
CHAPTER 13 TROUBLESHOOTING
c.
After Downloading
1) Turn off the copier's main power switch, and disconnect the power plug.
2) Turn off the PC.
3) Disconnect the bi-Centronics cable from the PC and the copier.
4) Slide the download switch to the COPY position, and connect the two connectors.
Connectors
Switch for down loading
COPY
Figure 13-707
5) Close the connector cover, and close the front door.
6) Turn on the main power switch and the control panel power switch.
7) Start service mode, and check the ROM version:
COPIER>DISPLAY>VERSION
13-159
COPYRIGHT © 2000 CANON INC.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Advertisement
Chapters
Table of Contents
Troubleshooting
