Canon ImageRunner 600 Service Manual page 312

2) Remove the screw [5], and detach the
front fixing plate [6]; then, detach the pre-
registration roller assembly [7].
3) Remove the two springs [8], E-ring [9],
and arm support shaft [10] at the front.
4) Remove the E-ring [11], spacer [12], and
bearing [13].
5) Perform steps 3) and 4) for the rear; then,
detach the pre-registration roller assem-
bly.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[7]
[6]
[5]
Figure 7-D807
[10]
[13]
[12]
Figure 7-D808
[8]
[11]
[9]
7-73