Vii . Upgrading The Copier; Replacing The Dimm - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

CHAPTER 13 TROUBLESHOOTING

VII . UPGRADING THE COPIER

The copier may be upgraded by either of the following two ways:

[1] Replacing the DIMM on the image processor PCB and the DIMM on the MFC PCB; or

[2] Re-writing the contents of the DIMM by downloading from the computer.

Figure 13-701 shows where the DIMMs are mounted.

DIMM on the MFC PCB

Figure 13-701

DIMM on the image

processor PCB

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

Table of Contents