Canon ImageRunner 600 Service Manual page 485

8) Insert a hex wrench [11] into the hole of
the lifter drive shaft [10] to hold it in place
(thereby preventing it from rotating).
Caution:
If you fail to prevent the lifter drive shaft
from rotating, the lifter cable will be-
come slack as soon as you remove the
lifter motor unit.
9) Remove five screws [12], and detach the
lifter motor unit [13].
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
[10]
Figure 10-C313
[12]
[13]
Figure 10-C314
[11]
[12]
10-37