10. Position Of The Pickup Roller; Releasing Solenoid Of The Manual Feed Tray; 11. Removing The Manual Feed Roller - Canon ImageRunner 600 Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM

10. Position of the Pickup Roller

Releasing Solenoid of the Manual
Feed Tray
Slide the solenoid into the direction of A
so that the gap between the shutter [1] and the
shutter plate [2] is 0.4 ±0.2 mm when the sole-
noid is pulled.

11. Removing the Manual Feed Roller

1) Open the manual feed tray door.
2) Remove the two screws [3], and detach
the front fixing plate [2] of the manual
feed roller assembly [1].
7-52
COPYRIGHT © 1999 CANON INC.
A
Figure 7-A821
[1]
Figure 7-A822
[1]
[2]
[3]
Figure 7-A823
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[2]