Canon ImageRunner 600 Service Manual page 471

Hide thumbs Also See for ImageRunner 600:

Table of Contents

When mounting the front cover, be sure

that the gap between the front cover and

the upper front cover is 3 ±1 mm.

If you inadvertently moved the drive belt

for the paper level indicator behind the

front cover when removing the front

cover and cannot find its initial position,

or moved the deck lifter, move down the

deck lifter to its lower limit, and move

the drive belt in the direction of the ar-

row (thereby increasing the while area)

until it stops; then, mount the front

cover. (Operating the deck without

matching the paper level indicator and

the deck lifter position can damage the

drive mechanism of the paper level indi-

Deck front cover

The lifter moves

down to indicate

an increase in the

level of paper

(white area).

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

CHAPTER 10 SIDE PAPER DECK

Upper front cover

Figure 10-A304b

Figure 10-A305 (front view)

Chapters

Table of Contents