Removing The Control Panel Pcb And The Lcd Panel - Canon ImageRunner 600 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
2) Remove the two mounting screws [4], and
disconnect the two connectors [5]; then,
detach the control panel inverter PCB [6].
3. Removing the Control Panel PCB
and the LCD Panel
1) Remove the three screws [1], and detach
the control panel lower cover [2].
2) Remove the CPU PCB.
3) Remove the eleven screws [3] and the two
screws [4], and detach the CPU PCB.
9-32
COPYRIGHT © 1999 CANON INC.
[4] [5]
[6] [5]
[4]
Figure 9-B706
[1]
Figure 9-B707
[3] [4] [3]
[3] [3]
Figure 9-B708
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[2]
[3]
[3] [4] [3]
[1]