Removing The Vertical Path Roller 2 - Canon ImageRunner 600 Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM
2. Removing the Vertical Path Roller
2
1) Remove the deck (right), and slide out the
cassette 3/4.
2) Remove the four screws [1], and detach
the cassette mount front lower right cover
[2].
3) Disconnect the connector [3], and remove
the screw [4]; then, detach the guide plate
[5].
7-68
COPYRIGHT © 2000 CANON INC.
[1]
[1]
Figure 7-C803
[3]
Figure 7-C804
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
[1]
[2]
[4]
[5]