2
Orienting the Deck/Cassette Separation Roller
When replacing the separation roller, be sure to orient it as follows:
3
Orienting the Deck/Cassette Pickup Assembly Feeding Roller
When mounting the deck/cassette pickup assembly feeding roller, be sure that the belt pulley
[2] is toward the copier's front. When mounting the feeding roller [3] to the feeding roller shaft [4],
be sure that the round marking [5] is toward the copier's front.
COPYRIGHT © 1999 CANON INC.
Wider groove
(front of the copier)
Figure 13-D202
[3]
[4]
[2]
[1]
Figure 13-D203
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
Narrower groove
[5]
(front of the copier)
13-19