Canon ImageRunner 600 Service Manual page 793

<LAMP>
Adjusting the Activation Voltage of the Scanning Lamp
Level 3
L-DATA Entering Scanning Lamp Intensity Data
• If faulty images are generated after execution of
COPIER>FUNCTION>CCD>CCD-ADJ, enter the
value recorded on the service label.
• This will determine FL-PWM.
<AE>
AE Adjustment
Level 3
AE-TBL Adjusting Text Density for Real-Time AE Mode
• Enter a value to adjust the density correction curve
for real-time AE mode (10 settings).
Copy density
White
COPYRIGHT © 2000 CANON INC.
Description
Higher setting
Lower intensity
Lower setting
Description
A higher setting makes the text darker
A lower setting makes the text lighter.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
Higher intensity
White
Original density
COPIER>ADJUST
Remarks
Range : 0 to 255
Remarks
Range : 0 to 9 (default : 5)
13-207