Main Unit
Removing the Right Cover
Assembly
■ Preparation
1. Remove the reader right
Reader Right Cover" on page 135
2. Remove the reader rear
Reader Rear Cover" on page 136
3. Remove the rear right cover
Rear Right Cover (Upper)" on page 137
■ Procedure
1. Open the right cover.
2. Remove the link between the right cover and pickup
unit.
cover."Removing the
cover."Removing the
(upper)."Removing the
3. Remove the belt.
• 2 screws
2x
4. Remove one screw.
Remove the connection cable.
2 connectors (The machine without the No.2 delivery unit
does not have the upper connector.)
CAUTION:
Be sure to disconnect the upper connector after
releasing the harness from the clamp to prevent
breaking of wire
139
4. Disassembly/Assembly