Removing The Upper Cover - Canon ImageRunner 600 Service Manual

4.

Removing the Upper Cover

1) Remove the rear cover. (See p. 10-24.)
2) Push down the latch plate [2] of the com-
partment [1] to open the compartment [1].
3) Remove the three screws [3], and discon-
nect the connector [4]; then, remove the
upper front cover [5].
4) Remove the two screws [6]; then, detach
the upper cover [7].
COPYRIGHT © 2000 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
[2]
(rear)
Figure 10-A308
[3]
Figure 10-A309
[6]
Figure 10-A310
[1]
[4]
[5]
[7]
10-25