Canon ImageRunner 600 Service Manual page 813

<PART-CHK>
Checking the Operation of Loads
Level 3
CL Selecting the Clutch to Check
Operation
1) Select CL.
2) Using the keypad, enter the code of the clutch. (See
3) Press the OK key.
CL-ON Checking the Operation of the Clutch.
Operation
1) Select CL-ON, and press the OK key.
MTR Selecting the Motor to Check
Operation
1) Select MTR.
2) Using the keypad, enter the code of the motor to
3) Press the OK key.
MTR-ON Checking the Motor
Operation
1) Select MTR-ON, and press the OK key.
SL Selecting the Solenoid to Check
Operation
1) Select SL.
2) Using the keypad, enter the code of the solenoid.
3) Press the OK key.
SL-ON Checking the Solenoid
Operation
1) Select SL-ON, and press the OK key.
COPYRIGHT © 1999 CANON INC.
Description
the code table that follows.)
check. (See the code table that follows.)
(See the code table that follows.)
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
COPIER>FUNCTION
Remarks
ON ! 10 sec OFF ! ON
! 10 sec OFF ! ON !
OFF
10 sec ON ! OFF
ON ! 10 sec OFF ! ON
! 10 sec OFF ! ON
!OFF
13-225