Canon ImageRunner 600 Service Manual page 211

CHAPTER 6 IMAGE FORMATION SYSTEM
5) Remove the three screws [6], and remove
the drum fixing plate [7].
6) Remove the screw [8], and detach the
bearing stopper [9]; then, lift off the pho-
tosensitive drum [10] while sliding it to
the front (in the direction of the arrow).
Points to Note When Removing
the Process Unit
[1] When you have removed the process
unit, do not rotate the photosensitive
drum in the opposite direction. Do-
ing so could bend the blade.
[2] Do not rotate the magnet roller of the
cleaner unit. Doing so will cause
leakage of toner.
6-52
COPYRIGHT © 1999 CANON INC.
[6]
[6]
Figure 6-A703
[8]
Figure 6-A704
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[6]
[7]
[10]
[9]