Routing The Manual Feed Tray Assembly Side Guide Timing Belt - Canon ImageRunner 600 Service Manual

7) Remove the two mounting screws [14],
and remove the sensor mount [15].
8) Detach the sensor from the sensor mount.
9. Routing the Manual Feed Tray
Assembly Side Guide Timing Belt
Butt the rack plate of the manual feed tray
against section A (open condition).
Move the slide volume in the direction of
B, and attach the timing belt to the pulley.
COPYRIGHT © 1999 CANON INC.
Pulley
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[14] [15]
Figure 7-A819
Timing belt
Rack plate
B
Slide volume
Figure 7-A820
[14]
Pulley
Section A
7-51