Canon ImageRunner 600 Service Manual page 355

4) Remove the two screws [6], pre-transfer
charging assembly cover [7], and fixing
roller knob [8]; then, remove the two
screws [9], and detach the fixing/feeding
unit cover [10].
5) Disconnect the four connectors [11], and
remove the three screws [12]; then, detach
the fixing motor [13].
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 8 FIXING SYSTEM
[9]
[8]
Figure 8-A503
[11]
[12]
[12]
Figure 8-A504
[6]
[7]
[9]
[6]
[10]
[13]
[12] [11]
8-27