Canon ImageRunner 600 Service Manual page 568

CHAPTER 12 MAINTENANCE AND SERVICING
8) Insert a ruler [6] between the magnet roll
[4] and the scraper [5], and move it from
the front to the rear and then from the rear
to the front to break any cake of toner.
9) Remove the cleaning blade from the
cleaning blade assembly.
10) Put the reversed or new cleaning blade [7]
against the edge of the rear of the blade
retaining plate [8].
Caution:
When butting the cleaning blade, be sure
to apply force to eliminate any gap.
12-14
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[5]
Figure 12-407
Butted against the edge.
[7]
[8]
Figure 12-408
[6]
[4]