Removing The Blade Unit - Canon ImageRunner 600 Service Manual

3.

Removing the Blade Unit

1) Remove the four mounting screws [1],
and detach the sleeve cover [2].
2) Remove the screw [3], and detach the po-
larity plate [4]; then, remove the five
screws [5], and detach the blade [6] to-
gether with the mounting plate [7].
Caution:
The blade must be adjusted to an ex-
tremely high accuracy. Do not remove it
on its own in the field. (Detach it to-
gether with its mounting plate.)
COPYRIGHT © 1999 CANON INC.
CHAPTER 6 IMAGE FORMATION SYSTEM
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
Figure 6-E705
[5] [5] [5]
[7]
[6]
Figure 6-E706
[2]
[5] [5]
[4] [3]
6-71