Starting Service Mode And Selecting An Item - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

The copier's service mode is divided into the following seven:

Starting Service Mode and Selecting an Item

1) Press the asterisk key "

2) Press "2" and "8" on the keypad at the same time.

3) Press the asterisk key "

!The above operations bring up the Initial screen (Figure 13-A803).

Copier service mode

ADF service mode

Shown if installed.

Finisher service mode

Shown if installed.

Accessory board service mode

Shown if installed.

Figure 13-A802 Service Mode Classification

" on the control panel.

Figure 13-A803 Initial Screen

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

CHAPTER 13 TROUBLESHOOTING

Control display mode

I/O display mode

Adjustment mode

Operation/inspection mode

Settings mode

Test print mode

Counter mode

Table of Contents