Canon ImageRunner 600 Service Manual page 98

b. Removing the No. 1 Mirror Mount Flex-
ible Cable
Caution:
Do not disconnect the connector (con-
nected to the No. 1 mirror mount) of the
flexible cable unless you are replacing
the No. 1 mirror mount. (Do not discon-
nect the cable when cleaning the mirror.)
1) Remove the two screws [1], and detach
the right glass retaining cover [2].
2) Remove the copyboard glass.
3) Move the No. 1 mirror mount to the cen-
ter.
COPYRIGHT © 1999 CANON INC.
CHAPTER 3 ORIGINAL EXPOSURE SYSTEM
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A
Figure 3-B511
No. 1 mirror mount
Flexible cable
Figure 3-B512
[1]
[2]
[1]
3-25