Canon ImageRunner 600 Service Manual page 347

Main power
switch ON
Fixing motor
(M3)
Main heater
(H1)
Sub heater
(H2)
70˚C
Figure 8-306 Sequence of Operations (error detection)
COPYRIGHT © 2000 CANON INC.
[1]E000
If the temperature detected by the main thermistor does
not increase to 70˚C or higher within 3.5 min after the
control panel power switch has been turned on.
Control panel power
switch ON
SLEEP WMUP
3.5 min
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 8 FIXING SYSTEM
Main power
switch OFF
3 sec
8-19