Canon ImageRunner 600 Service Manual page 517

3) Disconnect the two connectors, and de-
tach the dust-proofing glass.
4) Slide out the feeding assembly.
5) Remove the four screws, and detach the
process unit cover.
6) Remove the five screws, and detach the
inside cover (upper).
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
Connectors
Dust-proofing glass
Figure 11-403
Process unit cover
Screws (to prevent displacement)
Figure 11-404
Inside cover (upper)
Screws
Figure 11-405
11-23