Transfer Charging Assembly Cleaning Mechanism - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

CHAPTER 6 IMAGE FORMATION SYSTEM

Transfer Charging Assembly Cleaning Mechanism

Part 2>Chapter 5>10.1

When '1', the wire cleaner moves toward the rear.

Figure 6-312 Construction of the Cleaning Mechanism

Timing of Cleaning

1. The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch is

2. The wire cleaning mechanism is turned on in user mode.

3. At the end of LSTR after making 2000 prints following wire cleaning.

Related Error Code

(wire cleaner home position error)

When the wire cleaner is at the home position, '0'.

Wire cleaner

The cleaner does not reach the home position within a

specific period of time.

Home position

sensor (MSW6)

When '1', the wire cleaner moves toward the front.

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

Transfer/separation

charging wire

cleaning motor (M9)

Table of Contents