Removing The Inside Upper Cover; Removing The Fixing/Feeding Unit Cover - Canon ImageRunner 600 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
2.

Removing the Inside Upper Cover

1) Open the front door, and shift the fixing/
feeding assembly lever [1]; then, slide out
the fixing/feeding unit [2].
2) Remove the four mounting screws [3],
and detach the inside cover [4] (process
unit).
3) Remove the three mounting screws [5],
and detach the inside upper cover [6].
3. Removing the Fixing/Feeding Unit
Cover
1) Open the front door, and shift the fixing/
feeding assembly lever to slide out the fix-
ing/feeding unit.
2) Remove the mounting screw of the releas-
ing lever; then, while pushing the releas-
ing lever at the rear of the fixing/feeding
unit (Figure 8-A502) to the front, detach it
while the lever is up.
3) Remove the mounting screw [3], and de-
tach the fixing knob [4].
4) Remove the mount screw [5], and detach
the transfer separation charging assembly
cover [6].
5) Remove the two mounting screws [7], and
detach the fixing/feeding unit cover [8].
9-28
COPYRIGHT © 1999 CANON INC.
[5] [6] [3] [5]
[1]
Figure 9-A706
[7]
[4]
Figure 9-A707
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[4] [5] [3]
[2]
[5]
[6]
[7]
[3]
[8]