Orienting The Manual Feed Tray/Side Paper Deck Pickup Roller - Canon ImageRunner 600 Service Manual

CHAPTER 13 TROUBLESHOOTING
4

Orienting the Manual Feed Tray/Side Paper Deck Pickup Roller

Mount the manual feed tray/side paper deck pickup roller by reversing the steps used to remove
it with the following in mind:
• The front and rear pickup rollers are not interchangeable.
• The front pickup roller is identified by its silver collar. When mounting the pickup roller [1] to
the pickup assembly, be sure that the round marking [2] on the collar (silver) is toward the
copier's front.
[1] Pickup roller
[2] Marking (collar)
• The rear pickup roller is identified by its gold collar. When mounting the pickup roller [4] to
the pickup assembly, be sure that the round marking [5] on the side of the roller and the round
marking [6] on the collar (gold) are toward the rear of the copier.
(direction of rotation)
[4] Pickup roller
[5] Marking (roller)
[6] Marking (collar)
13-20
COPYRIGHT © 1999 CANON INC.
(direction of rotation)
[1]
Figure 13-D204a
[4]
Figure 13-D204b
[2]
Collar (silver)
[5]
[6]
(rear of the copier)
Collar (gold)
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
(front of the copier)