Reading Fan; Removing The Laser Cooling Fan - Canon ImageRunner 600 Service Manual

5) Disconnect the connector [3], and remove
the two screws [4]; then, detach the stream

reading fan [5].

5.

Removing the Laser Cooling Fan

1) Remove the copyboard glass.
2) Remove the original sensor unit 1.
3) Remove the image processor cover, and
detach the image processor PCB.
4) Remove the two screws [1], and discon-
nect the connector [2]; then, detach the la-
ser cooling fan [3] together with its
mount.
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[4] [5] [4]
Figure 9-C707
[1]
[3]
Figure 9-C708
[3]
[2]
[1]
9-37