Canon ImageRunner 600 Service Manual page 809

<INSTALL>
Operations for Installation
Level 3
TONER- Supplying Toner from the Toner Cartridge to the
S Hopper/Developing Assembly and Stirring the Toner
Inside the Developing Assembly
Operation
Select TONER-S to highlight, and press the OK key.
(The operation ends in about 10 min.)
1. Before pressing the OK key, check to be sure
2. Do not turn off the power while the machine is
<CCD>
Executing Auto Adjustment for CCD/Shading-Related Items
Level 3
CCD- Executing Auto Adjustment for Shading
ADJ Operation
1) Place standard white paper* (10 sheets or more) on
2) Select CCD-ADJ to highlight, and press the Ok key.
3) See that the machine has entered auto adjustment
4) Record all items under COPIER>ADJUST>CCD and
* Whitest of all papar used by the user (except paper
COPYRIGHT © 1999 CANON INC.
Description
Caution:
that the developing assembly is fitted securely.
in operation.
Description
the copyboard glass.
Standard white paper
mode. (The adjustment ends in about 1 min.)
the data under COPIER>ADJUST>LAMP>L-DATA
on the service label when they have been updated.
for a color copier).
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
COPIER>FUNCTION
Remarks
• A count-down number is
indicated to the right of
TONER-S during
operation.
• No key except the Stop
key is enabled during
operation.
Remarks
If you have replaced the
CCD unit, scanning lamp,
image processor PCB, or
standard white plate,
execute this mode.
13-221