CHAPTER 8 FIXING SYSTEM
C.
Controlling Temperature by Mode
The surface temperature of the fixing roller is controlled according to purpose for the following
operating modes:
Transparency mode
Thick paper mode
Power save mode
8-14
COPYRIGHT © 1999 CANON INC.
Purpose
To prevent wrapping of
transparencies.
To prevent drops in the surface
temperature of the fixing roller.
To reduce the power consumption.
Table 8-301
Lowers the control temperature.
Increases the down sequence rush
temperature.
Lowers the control temperature for
STBY.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Correction