Removing The Dimm Of The Mfc Pcb - Canon ImageRunner 600 Service Manual

CHAPTER 13 TROUBLESHOOTING
2.

Removing the DIMM of the MFC PCB

1) Turn off the main power switch, and disconnect the power cord from the power outlet.
2) If the printer board is installed, remove it.
3) Remove the rear cover.
4) Open the claws of the slot, and remove the DIMM as if to lift it at an angle.
Push.
DIMM
Push.
Figure 13-703
13-156
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.