Removing The Front Deck (Lifter) Draw-Out Sensor; Removing The Horizontal Registration Sensor - Canon ImageRunner 600 Service Manual

13. Removing the Front Deck (lifter)
Draw-Out Sensor
1) Disconnect the connector [1] from the
bottom of the duplexing unit; then, re-
move the screw [2], and detach the front
deck (left) feed sensor [3].
14. Removing the Horizontal
Registration Sensor
1) Remove the duplexing unit from the
copier.
2) Remove the front cover.
3) Disconnect the connector [1], and remove
the three screws [2].
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
Figure 7-F823
Figure 7-F824
[1]
[2]
[3]
[2]
[1] [2]
7-87