Copier - Canon ImageRunner 600 Service Manual

CHAPTER 12 MAINTENANCE AND SERVICING
IV . SCHEDULED SERVICING ITEMS
Caution:
Do not use solvents/oils other than those shown herein.
A.

Copier

: Clean : Replace
Unit
Externals/ Copyboard glass
controls
Ozone filter
(FM2, FM8)
Dust-proofing filter
(FM1, FM3, FM4;
FM10, FM14)
Scanner Scanner cable
Scanner rail
No. 1 through
Optical path
No. 3 mirrors
Dust-proofing glass
Reflecting plate
Standard white plate
Charging wire
Charging
(primary, pre-
assembly
transfer,
transfer/separation)
Grid wire (primary)
Charging assembly
shield plate (each
assembly)
Roller electrode
12-8
COPYRIGHT © 2000 CANON INC.
: Oil : Adjust
Part
Instal- every
lation 250,000
Table 12-401-1
: Inspect
Intervals
every every
500,000 750,000 1,000,000
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Remarks
every
Remove the dust from
the surface of the filter.
See Figure 12-401.
Remove the dust from
the surface of the filter.
See Figure 12-401.
Check/adjust for the
first 250,000 copies.
Apply silicone oil
(FY9-6011).