Installing The Control Card V - Canon ImageRunner 600 Service Manual

CHAPTER 11 INSTALLATION
IV . INSTALLING THE CONTROL CARD V
Check to make sure that the image/
memory lamp is off before turning off the
main power switch.
1. Removing the Control Panel
1) Remove the screw (one each), and detach
the two magnet plates from the top of the
control panel.
2) Remove the screw, and detach the pri-
mary charging assembly cover.
11-22
COPYRIGHT © 1999 CANON INC.
Magnet plate
Figure 11-401
Primary charging
assembly cover
Figure 11-402
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Screws
Magnet plate
Screw