Position Of The Cassette 3/4 Pickup Solenoid (Sl9/10) - Canon ImageRunner 600 Service Manual

CHAPTER 13 TROUBLESHOOTING

9.8 Position of the Cassette 3/4 Pickup Solenoid (SL9/10)

Adjust the pickup solenoid using the screw [1] so that the distance between the bottom face of
the pickup unit of each holder and the bottom edge of the bushing of the roller support plate is 36
±0.5 mm when the plunger of the pickup roller releasing solenoid is pulled as shown (operated as in
[1] and [2]).
[2]
[1]
[1]
[2]
A
Viewed from A
Figure 13-D217
13-31
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.